English
简体中文
ไทย
繁體中文
日本語
한국어
Torque Testers
KTM-150
SpecificationsModelKTM-1000KTM-250KTM-150KTM-15KTM-6KTM-50SMeasurement range(kgf.cm)50~10003.0~250.01.5~150.00.15~15.00.02~8.00.5～
0.15–15.0 N·m
Torque Testers
KTM-6
KTM-6 — Torque tester. Review model-specific specifications below and confirm the exact configuration with KILEWS Thailand.
Technical documents3 filesPrice and lead time are confirmed by model, quantity and project requirements.
Local selection supportAccessory & controller matchingManufacturer documents
PRODUCT INFORMATION
Features & technical specifications
Key Features
Torque tester
Compare the model-specific parameters in the specification table.
Confirm compatible accessories, document version and Thailand availability before ordering.
Specifications
Model | KTM-1000 | KTM-250 | KTM-150 | KTM-15 | KTM-6 | KTM-50S |
Measurement range(kgf.cm) | 50~1000 | 3.0~250.0 | 1.5~150.0 | 0.15~15.0 | 0.02~8.0 | 0.5～50.0 |
Measurement range(Lbf.in) | 45~885 | 3.0~217.0 | 1.5~130.0 | 0.15~13.0 | 0.02~7.0 | 0.5~43.4 |
Measurement range(N.m) | 5~100 | 0.30~25.00 | 0.15~15.0 | 0.015~1.500 | 0.2~80.0(cN.m) | 0.05~4.90 |
Accuracy | +/-0.5%(20~100N.m)， +/-1.0%(10~20N.m)， +/-2.0%(5~10N.m) | +/-0.5% | +/-0.5% | +/-0.5% | +/-0.5% | +/-0.5% |
Power supply | 3.7V,4400mAh Lithium lon | 4.8VDC (Ni-MH chargeable battery 1.2VX4 cell 1650mAh) | 4.8VDC (Ni-MH chargeable battery 1.2VX4 cell 1650mAh) | 4.8VDC (Ni-MH chargeable battery 1.2VX4 cell 1650mAh) | 4.8VDC (Ni-MH chargeable battery 1.2VX4 cell1650mAh) | 4.8VDC (Ni-MH chargeable battery 1.2VX4 cell1650mAh) |
Charging time | 8 hours | 3 hours | 3 hours | 3 hours | 3 hours | 3 hours |
Operating time per full charge | 8 hours | approx. 12 hours | approx. 12 hours | approx. 12 hours | approx. 12 hours | approx. 12 hours |
Battery life | Rechargeable for more than 300 cycles | Rechargeable for more than 300 cycles | Rechargeable for more than 300 cycles | Rechargeable for more than 300 cycles | Rechargeable for more than 300 cycles | Rechargeable for more than 300 cycles |
Overall dimensions (mm) | 229X102X80(H) | 160X210X45(H) | 230X125X65(H) | 230X125X65(H) | 230X125X65(H) | 230X123X65(H) |
Weight(kg) | 2.7 | 2.0 | 1.8 | 1.8 | 1.8 | 1.8 |
Dedicated charger | Input AC100V~240V 50/60Hz Output DC5V1.0A Max | Input AC100V~240V 50/60Hz Output DC12V 400Ma | Input AC100V~240V 50/60Hz Output DC12V 400mA | Input AC100V~240V 50/60Hz Output DC12V400mA | Input AC100V~240V 50/60Hz Output DC12V400mA | Input AC100V~240V 50/60Hz Output DC12V400mA |
Accessories | Spring test fixtureX1, SJ-100N.m | Spring test fixtureX1, AJ-250 | Spring test fixtureX3, AJ-150/AJ-50/AJ-15K | Spring test fixtureX2, AJ-15/AJ-3 | Spring test fixtureX1, AJ-3 | Spring test fixtureX1, AJ-50S |
Configuration and quotation checks
The product table lists ±0.5% accuracy; instruction manual Y2F071-010 says “±0.5% or within ±3 digit”. Confirm the applicable method, calibration conditions and actual display unit. Do not assume a reading-based or full-scale basis.
The listed accessory is AJ-3 ×1. The manual lists AJ-3 at a maximum measurable 3 kgf·cm; this does not authorize testing to the meter table’s 8 kgf·cm upper limit with that joint. The manual body also mentions a 6 kgf·cm maximum, unlike its 8 kgf·cm specification entry. Confirm the supplied revision and approved usable range.
The product table and manual differ on battery chemistry/cell configuration, operating time and dimensions. Do not select a replacement battery or charger from an assumed common KTM specification. Provide the nameplate, target torque/unit, tool type, joint/shaft dimensions and required calibration documents for confirmation. USB output does not establish USB-C, software/OS support or included cables.
Can I use AJ-3 up to 8 kgf·cm?
Do not assume this. The manual’s AJ-3 limit is 3 kgf·cm; ask for an approved joint and setup for the required torque.
Does KTM-6 measure 80 N·m?
No. The table shows 80.00 cN·m, not 80 N·m; confirm the instrument revision and actual display unit before ordering.
※Scroll horizontally to read the table
Accessories listed by KILEWS headquarters
No dedicated accessories are listed on the headquarters page. Confirm with KILEWS Thailand.
DOCUMENTS
Product documents
RELATED PRODUCTS
