SNT-CSM 712 / 718

Configuration, measurement and quotation

Both rows list B 9.5 and W3/8″. Related accessories list KH-7, KH-2L, KP-AUX-TL-450N, KP-AUX-TL-700N and KP-AUX-TI-300N. The published start modes are lever, push, lever + push and external start. Confirm the exact output/holder drawing, supplied cable, tool revision and delivered items. The B9.5/W codes alone do not establish every socket geometry, pin retention, drive direction or universal compatibility.

The table note is “+/- 3sigma / AVG., 5%”. The feature claim of less than 1% concerns the torque transducer. These are distinct from calibration uncertainty and the achieved screw-joint result. The 1°–30600° encoder angle-control range is not an angle-accuracy specification. Confirm calibration, actual joint, firmware and acceptance method.

Use the approved KL-NTCS-M7/tool/cable configuration; do not connect the DC tool directly to AC or assume KL-TCC interchangeability. External start does not establish connector pinout, signal voltage or PLC/MES compatibility. A counter is not measured torque/angle evidence. Confirm measured fields, OK/NG logic, job/workpiece identity, timestamps, export, retention and access before accepting production traceability.

For the workstation, provide total suspended tool/holder/cable weight, target torque and reaction direction, mounting orientation, work envelope and fixture. Weight support and torque reaction are different duties; no arm capacity or safety approval is inferred from a related-accessory name.

Does the transducer claim guarantee every joint result?

No. Keep sensor tolerance, tool repeatability, calibration and the actual joint acceptance method separate.

Which exact configuration should I quote?

Choose SNT-CSM712, SNT-CSM718 explicitly. Provide target torque/unit, screw/joint, required speed/angle steps and start mode, KL-NTCS-M7, matching cable, output/bit/fixture, records, quantity, delivery location and required date. Sales confirms price, stock and supplied items.