Sensor Systems

SKT-CG 30 / 50 / 70

SKT-CG 30 / 50 / 70 — Torque-transducer servo screwdriver. Review model-specific specifications below and confirm the exact configuration with KILEWS Thailand.

Call us

Technical documents4 files

Price and lead time are confirmed by model, quantity and project requirements.

Local selection supportAccessory & controller matchingManufacturer documents

PRODUCT INFORMATION

Features & technical specifications

Key Features

Torque-transducer servo screwdriver
Compare the model-specific parameters in the specification table.
Confirm compatible accessories, document version and Thailand availability before ordering.

Specifications

Model	Input Voltage	Torque (N.m)	Torque (kgf.cm)	Torque (Lbf.in)	No-load speed (r.p.m)	Rated power	Weight (g)	Length (mm)	Compatible power controller	Compatible bit type
SKT-CG30	DC40V	0.6~3	6.11~30.59	5.31~26.55	1600~160	90w	830	297	KL-TCG	A、B 9.5、D
SKT-CG50	DC40V	1~5	10.2~51.00	8.85~44.25	1100~110	90w	830	297	KL-TCG	A、B 9.5
SKT-CG70	DC40V	1.4~7	14.27~71.39	12.39~61.96	660~70	90w	830	297	KL-TCG	B 9.5

Configuration, measurement and quotation

The tool specification table lists KL-TCG. SKT-CGS and SKT-CG30/50/70 use the KL-TCG column; SKT-CG120/180 are listed under KL-TCG-L. The generic KL-TCG Series accessory heading is not approval to drop the -L suffix. Confirm the exact tool/controller nameplate, firmware, approved cable and delivered set; do not infer compatibility from a similar model name.

The public tool table does not specify a numeric accuracy or repeatability limit. Confirm the model-specific manual, calibration conditions, joint and acceptance criteria. Do not copy SNT-CS accuracy, angle ranges or LCG speeds. Bit/output codes describe the published options only; confirm the actual holder, bit/socket, retainer and drawings before ordering. Use the approved DC40V controller set, not direct AC. Confirm I/O pinout, voltage, polarity, isolation and approved wiring; RS-232/LAN listings on a controller do not establish ready-made PLC/MES integration.

Confirm mounting direction, clearance, torque reaction and the approved holder, grip and support. Accessories listed on this page require model-level confirmation and are not automatically included. Counting, detected turns, measured torque and exported angle fields are separate acceptance items. Confirm calibration, OK/NG, workpiece identity, timestamps, software scope and data retention.

Which controller is specified?

KL-TCG is listed for this group. Confirm the complete approved set, cable and suffix.

Is a numeric accuracy guaranteed by this page?

No numeric accuracy is provided in the published tool table. Confirm the exact manual and calibration/acceptance conditions.

What should a quotation include?

Select the exact submodel. Provide torque and unit, screw/joint, process speed, controller and cable, bit/fixture, mounting and reaction support, I/O and record needs, quantity, delivery location and required date. Sales confirms price, stock and supplied items.